Table of Contents
The Nori Cloud reaches steaming temperature in 25 seconds. Fill the tank, wait for it to heat, choose Steam or Max, then glide top to bottom in slow, even passes. That’s the whole process.
But a few small habits separate a good steaming session from a great one, and they’re worth two minutes to learn.
Curious how the Cloud stacks up against the Nori Press first? Start there, then come back to this guide.
What You Need Before You Start
Tap water works fine in the Nori Cloud. But minerals in tap water build up in the steam vents over months of use, so Nori Fabric Facial or plain distilled water keeps steam output consistent for longer. Either way, fill to the marked line and no higher. Overfilling is one of the fastest ways to end up with water dripping instead of steam, a problem our spitting-water troubleshooting guide covers in detail.
You’ll also want a hanger for vertical steaming, or a flat surface for anything you’d rather lay down, like a scarf or a table runner.
Step-by-Step Steaming Process
- Twist the reservoir off the bottom of the steamer, fill it with water or Fabric Facial, tighten the cap, and twist it back until it clicks.
- Power on and wait. The Ready light blinks while the Cloud heats and turns solid when it’s ready, in about 25 seconds.
- Pick your setting. Steam handles cotton, poly, and most everyday fabrics.
- Clear the line. Let the Cloud release steam into the air for about 5 seconds before it touches fabric. Nori recommends this step to flush out leftover water.
- Position the garment. Hang it, or lay it flat. The Nori Cloud works in both orientations.
- Glide, don’t hover. Hold the steam head an inch or two from the fabric and move it top to bottom in straight passes. Pull the fabric taut with your free hand as you go, since tension helps wrinkles release faster.
- Let it set. Give the garment a minute to cool before you fold it or put it on. Fabric holds its new shape better once the heat leaves.
Technique by Fabric Type
Fabric | Setting | Technique |
Silk and delicates | Steam | Hold slightly further from the fabric, one light pass |
Cotton and poly blends | Steam | Standard distance, single pass top to bottom |
Linen | Max | Slower pass, pull the fabric taut as you steam |
Denim | Max | Two to three slow passes on thicker seams |
Wool and knits | Steam | Steam without pressing into the fabric, hang to set |
Steaming Household Fabrics
The Nori Cloud isn’t limited to clothes. Curtains still hanging on the rod, bedding, and upholstery all respond well to a few vertical passes. You don’t need to take anything down first. Just work the steam head in the same slow, top-to-bottom motion you’d use on a shirt.
See Nori Cloud vs. a Traditional Garment Steamer for how this compares to a standard handheld model on household fabrics.
After You’re Done
Empty the tank if you’re storing the Nori Cloud for more than a few days, and wipe the steam head with a dry cloth before you put it away. Storing it upright keeps any leftover water from pooling near the vents.
The Nori Cloud
$89.99
The next generation of clothing steamers with no leaks, no spits, just better steam.… read more
FAQs
How long does one tank last?
The Nori Cloud delivers around 20 minutes of continuous steam on a single fill, which covers most full-outfit sessions without a refill.
Can I use tap water for Nori Cloud?
Yes, but distilled water or Nori Fabric Facial reduces mineral buildup in the steam vents over time, which keeps output stronger for longer.
Does Nori Cloud work on hanging clothes?
Yes. The Nori Cloud was built to steam vertically, so hanging garments, closet doors, and curtains on the rod are all fair game.
What if my Cloud starts spitting water instead of steam?
That’s almost always fixable. Our full troubleshooting guide covers the exact causes and fixes.
