Table of Contents
The Nori Press presses and irons garments using two heated clamping plates. The Nori Cloud steams garments using vapor alone, with no clamping plates at all.
Grab the Press when you want a pressed, ironed finish in under five minutes. Grab the Cloud when you want fast steam without touching a hot plate to the fabric, especially on delicates, curtains, or anything you can’t lay flat.
Most Nori households end up owning both, and here’s exactly why.
What Each Device Actually Does
The Nori Press is a 3-in-1 press, steamer, and iron. The Nori Press clamps both sides of a garment at once between two heated aluminum plates, delivering a pressed, dry-clean-style finish. The Nori Press offers six fabric-specific heat settings and a built-in steam function, and it needs no ironing board.
The Nori Cloud works differently. The Nori Cloud is a handheld steamer with no clamping plates, built to smooth wrinkles with steam alone. The Nori Cloud heats up in 25 seconds and holds enough water for 20+ minutes of continuous steam. The Nori Cloud runs on two settings, Steam and Max, and works vertically for hanging garments or horizontally for anything laid flat.
The Nori Cloud’s anti-spit design targets the leaking and water-spotting most steamers are known for, a problem our troubleshooting guide covers in full.
One presses. One steams. That distinction drives almost every decision below.
Side-by-Side Comparison
Feature | Nori Cloud | Nori Press |
Device type | Handheld steamer | 3-in-1 press, steamer, and iron |
Heat-up time | 25 seconds | Not published |
Continuous run time | 20+ minutes of steam | 29ml tank, 5–7 garments per fill |
Weight | Lightweight, self-standing | 1.4 lbs |
Settings | 2 (Steam, Max) | 6 fabric-specific heat settings |
Ironing board required | No | No |
Anti-spit technology | Yes, built-in | Steam function is separate from pressing |
Price | $89.99 | $119 |
When the Nori Cloud Wins
The Nori Cloud handles anything you’d rather not clamp between two hot plates. Sequins, beading, and embellished pieces do better with steam alone than with direct pressure.
The Nori Cloud is also the better tool for household fabrics. Curtains still hanging on the rod, bedding, and upholstery all respond to a quick pass of steam, and the Cloud’s vertical-hold design was built with exactly that in mind.
Our step-by-step Nori Cloud guide walks through the exact technique for each fabric type.
And if you’re short on time, 25 seconds to ready beats waiting on a plate to heat.
The Nori Cloud
$89.99
The next generation of clothing steamers with no leaks, no spits, just better steam.… read more
When the Nori Press Wins
The Nori Press delivers a crisp, pressed finish on dress shirts, trousers, and blazers that steam alone can’t match. The clamping action does the flattening work that matters for a sharp collar or a pressed trouser crease.
The Nori Press also covers iron and steam duty in one device, so if you’re only buying one tool and your wardrobe leans structured, the Press earns its spot first.
Can You Use Both?
Yes, and the pairing makes sense. Use the Press for everyday shirts and structured pieces. Reach for the Cloud for dresses, embellished pieces, curtains, and hard-to-reach spots, especially while traveling.
FAQs
Is the Nori Cloud a replacement for the Nori Press?
No, and it wasn’t designed to be. The Nori Press presses and irons using heat and pressure. The Nori Cloud steams using heat and vapor alone. They solve different wrinkle problems, and most households get more use out of owning both than choosing one over the other.
Which one is better for travel, Nori Press or Nori Cloud?
Both the Nori Cloud and the Nori Press were built for travel, but the Cloud has an edge for quick hotel-room touch-ups since there are no plates to wait on and no clamping technique to think about. The Press wins if you want one device that also gives you a genuinely pressed look for a meeting or event. Our how-to-use guide covers Cloud technique step by step.
Can the Nori Cloud get creases as sharp as the Nori Press?
No, and that’s an honest answer. Steam relaxes fibers; it doesn’t flatten them the way clamping plates do. For a crisp collar or a pressed trouser crease, reach for the Nori Press. For military-sharp creases on heavy fabrics, a traditional iron still works faster.
