How We Trim
The steps below outline our recommended use for our high performance fabric shaver
Shop the TrimStep 1
Turn it On
Turn your device on by pressing the power button. The power icon will turn white when powered on.
Step 2
Start Trimming
Lay a garment flat and place the device's silver blade against the garment's pilled surface. Move in small circles or sweeping motions to remove the pills.
Step 3
Empty the Collector
Remember to empty the lint collector when it appears full. To do so, press firmly down on the white rectangular button and slide this chamber down & out of the device, removing any fuzz that has collected.
How to Charge your Trim
The power button will turn red when the device requires charging.

Charge your device using the USBC charging cord included. The white power icon will blink when charging.
The power button will turn green when fully charged.

How to Clean your Trim
Remove the lint collector when it appears full and scoop out any collected lint with the provided cleaning brush.
Clean the interior of your device by twisting off the blade cover to reveal the blade. Using that same brush, collect lint from your blade and the blade cavity.
After repeated use, you can replace the device’s blade when it appears dull. Twist off the blade cover and carefully lift the blade away from the device. Using caution, carefully place a new blade onto the prong in the center of the cavity and adjust until you feel the blade slide into place.
What does the Nori Trim Do?
The Nori Trim is an electric high-performance fabric shaver designed to remove pills, lint and pulls from any fabric. The speed of the device’s six precision razor blades will gently trim any unwanted pills or imperfections from your garment.
Will this work on all fabrics?
The Nori Trim was designed to be used on all fabrics. The device’s six razor blades are encased in a protective blade cover that will prevent the blades from getting too close to a fabric in which damage could occur. That said, please operate the device with care, pressing the device’s blade into a fabric gently and applying additional pressure as needed. Be sure to always move the device in small circles or sweeping motions rather than holding it in one spot.
Can I use this on furniture (anything other than clothing)?
Of course! This device can be used on upholstered couches, blankets, curtains, etc. as well as accessories such as knit gloves, scarves, or hats.